6mm carbon potentiometers datasheet
A 6mm carton potentiometer is an electronic component that is commonly used in a variety of audio and electronic circuits.
Potentiometers are variable resistors that allow the user to adjust the resistance of the circuit, typically by turning a knob or slider.
The "6mm" in the name refers to the diameter of the shaft or knob of the potentiometer,
which is typically 6mm in size. The "carton" in the name refers to the type of package or housing that the potentiometer is mounted in.
| 6mm carton potentiometer | |
| Electrical characteristics | |
| Total resistance | B5K |
| Total resistance tolerance | R＜500KΩ：±20% |
| R≥500KΩ：±30% | |
| Resistance taper | Taper B |
| Rated power | 0.1w |
| Max.operating voltage | AC50V |
| Residual resistance | R≤1KΩ:30Ωmax |
| R＞1KΩ:3%max | |
| BMechanical characteristecs | |
| Total rotational angle | 250°±20° |
| Rotational torpue | 80~350gf.cm |
| Rotational stop strength | 0.5Kgf.cm Max |
| Soldering heat | Less than 260℃ and quicker than 3 seconds |
| Durability | |
| Rotation life | R≤15% max.for 100 cycles |
| Other data | |
| Low-temperature | After being subjected to -10±3℃ for 3 hours, the component should be allowed to return to room temperature for 1 hour (no load), and the rate of change in resistance should be no more than ±10% compared to the original value. |
| High-temperature | After being subjected to 70±3℃ for 24 hours, the component should be allowed to return to room temperature for 4 hours (no load), and the rate of change in resistance should be no more than +5~-15% compared to the original value |
| Load Life In Humidity | After being subjected to a direct current rated voltage at 40±2℃ and 90-95% relative humidity for 350 hours, the component should be allowed to return to room temperature for 5 hours, and the rate of change in resistance should be no more than ±20% compared to the original value |
OUT DRAWING AND MOUTING HOLE DETAL
