TLLNA0700003 low noise amplifier uses high frequency microelectronics assembly technology and high reliability design is integrated together. It can provide 20dB under single power +5V operation Gain and output 1dB compression point +18dBm, within the specified frequency range 30~700MHz has a low noise figure of 0.8dB and excellent port standing wave ratio. the zoom the device adopts 6.0mm*6.0mm surface mount package, which is suitable for reflow soldering process.
Low Noise Amplifier Main Data:
◆ 50 Ohm impedance
◆ 30~700MHz
◆ 0.8dB ultra-low noise figure
◆ 20.0dB gain
◆ 1dB gain flatness
◆ Output 1dB compression point +18dBm
◆ Output third-order intercept point +35dBm
◆ 1.50:1 input and output VSWR
◆ +5V single power supply
◆ Working temperature -40°C~+85°C
Low Noise Amplifier Application
◆ broadcast
◆ Security system
◆ Measure
◆ radio station
◆ fixed antenna
Low Noise Amplifier Electrical Characteristics:
No. | Test Item | Symbol | Test process | Min | Nom | Max | Unit |
1 | Gain | S21 | 30 ~700MHz | -- | 20 | -- | dB |
2 | Gain flat |
| 30 ~700MHz | -- | +/-1 | +/- 1.5 | dB |
3 | Input VSWR | SWR1 | 30 ~700MHz | -- | 1.70 | 2.0:1 | Ratio |
4 | Output VSWR | SWR2 | 30 ~700MHz | -- | 1.50 | 2.0:1 | Ratio |
5 | Reverse isolation | S12 | 30 ~700MHz | -- | -25 | -- | dB |
6 | Noise coefficient | NF | 30 ~100MHz | -- | 1. 15 | 1.7 | dB |
100 ~700MHz | -- | 0.8 | 1.5 | ||||
7 | Ouput 1dB compression point | P1 | 30 ~700MHz | -- | 18 | -- | dBm |
8 | Output third order intercept point | OIP3 | 30 ~700MHz, dual-tone signal, interval 1MHz, dual-tone output power +0dBm | -- | 35 | -- | dBm |
9 | Supply current | Idd | Vdd= +5V | -- | 60 | 80 | mA |
10 | Work tempperature ramge | TO | -40 | -- | +85 | °C |
GDimension
