3296 potentiometer datasheet, optional 3296x,3296w,3296y
| Electrical characteristics | |
| Range of resistance | 10Ω—2MΩ |
| Resistance tolerance | ±10％ |
| Terminal resitance | ≤1％R OR 2Ω |
| Contact resistance vartion | CRV≤3％R OR 3Ω |
| Insulation resistance | R1≥1GΩ(100Vdc) |
| Withstand voltage | 640Vac |
| Maximum wiper current | 100mA |
| Effective electrical travel | >Total mechanical travel的70% |
| Environmental characteristics | |
| Rated Power | 0.5W@＋70℃ ，OW@＋100℃ |
| Temperature range | －55℃—＋100℃ |
| TCR | ±250ppm／℃，±100ppm／℃ |
| Collision | 390m／s2,4000 times，△R≤±5％R |
| Temperature range | -55℃,30min,+100℃,30min |
| 5 cycle | △R≤±5％R，△(Uab／Uac)≤±5％ |
| Vibration | 10—500HZ,0.75mm,6h |
| electric interrupted ≤100μs Electrical interruption≤100 μs | |
| △R≤±5％R，△(Uab／Uac)≤±7.5％ | |
| △R≤±5％R，△(Uab／Uac)≤±5％ | |
| Climate category | According IEC68-2-2 |
| △R≤±3％R，R1≥100MΩ | |
| 70℃Electrical endurance | 0.5W,1000h |
| △R≤±10％R,CRV≤3%R or 5Ω | |
| Mechanical endurance | 200cycles |
| △R≤±10％R,CRV≤3%R or 5Ω | |
| Steady damp heat | According IEC68-2-3,Ca,96h |
| △R≤±10％R，△R1≥100MΩ | |
| Physical characteristics | |
| Total mechanical travel | 28±2cycles |
| Staring torque | ≤35mN·m |
| Mark | Resistance tolerance（±10% without marked） |
| Type | |
| Standard package | 50pcs/tube |