Ceramic filter

Center Frequency fo (MHz): 10.700MHz±30kHz（Red）
Recovered Audio Voltage (at fo)(mV) min: Within 60 to 90
Distortion (at fo) (%) max: 0.9
Temp. Coefficient of Frequency (ppm/℃) max: ±100（Center Frequency drift，-25℃～85℃）

10.7 MHz Ceramic Filter – Achieve outstanding signal clarity with our 10.7 MHz ceramic filter. Specifically designed for high-frequency applications, this filter provides precise frequency selection and minimizes signal interference, making it perfect for RF systems and communication devices.

10.7 MHz ceramic filter datasheet

Appearance: No visible damage and dirt.
Construction: Leads are fixed on the electrode and the body is packaged by resin.
The products conform to the RoHS directive and national environmental protection law.

Dimensions and mark

CERAMIC FILTER.jpg

RATING AND ELECTRICAL SPECIFICATIONS

RATING

Item	Content
Withstand voltage(V)	50(DC, 1min)
Insulation resistance Ri,(MΩ)min.	100( 10V,1min)
Operating temperature range(℃)	-25~85℃
Storage temperature range(℃)	-40~85℃

ELECTRICAL SPECIFICATIONS

Item	Requirements
Center freuquency fo(MHz)	A:10.700MHz±30kHz(Red)
Recovered audio voltage (@fo)(mV)min	Within 60 to 90
Distortion (@fo)(%) max	0.9
Recovered audio 3dB bandwidth (kHz) min	300
Temp. coeffiecient of frequency (ppm/℃)	±100(center frequency drift, -25~85℃)

MEASUREMENT

Measurement Conditions: Parts shall be measured under a condition (Temp.: 20±15 ℃, Humidity: 65±20% R.H.) unless the standard condition (Temp.:25±2 ℃,Humidity: 65±5% R.H.) is regulated to measure.

CRYSTAL FILTER DATASHEET

PREVIOUS：21.4MHz Crystal filter NEXT：868.3MHz saw filter